The Gasoline Motor

Purchase of this book includes free trial access to www.million-books.com where you can read more than a million books for free. This is an OCR edition with typos. Excerpt from book: CHAPTER III Bearings IN the general meaning of the term, a bearing is any part that carries weight or pressure and at the same time rubs over another surface. According to this definition, the portion of the cylinder walls traversed by the pistons are bearings, and that is in reality the case, but the term...
More Description

Purchase of this book includes free trial access to www.million-books.com where you can read more than a million books for free. This is an OCR edition with typos. Excerpt from book: CHAPTER III Bearings IN the general meaning of the term, a bearing is any part that carries weight or pressure and at the same time rubs over another surface. According to this definition, the portion of the cylinder walls traversed by the pistons are bearings, and that is in reality the case, but the term has come to be applied more specifically to the part of the machine in which another part revolves, either continuously or intermittently. Thus the portions of the crank shaft on which it is supported and the parts of metal in which they revolve combine to form the crank shaft bearings. The shaft or stud on which a gear or wheel is mounted and on which ' revolves is the bearing of that gear or wheel. Although they are concealed, as some six- cylinder motors may be provided with as many as three dozen, or more, bearings?if we consider those on which the cam, pump, and magneto shafts and the gears are mounted? but what descriptions, rules, and precautions apply to all hold true in the largest sense when the crank shaft, connecting rod, and wrist pin bearings only are considered. It is on this latter class that the greatest wear of the motor is concentrated, and the owner who understands and inspects these need fear no trouble from the cam shaft and gear bearings. The expert will judge of the condition of a motor by the wear that has occurred in the bearings rather than by any exhibition of temporary power that it may develop in a short test, and it is for this reason that the general public runs a risk whenever it buys a second-hand car that has not been thoroughly overhauled by a reputable factory or inspected by a competent engineer. The bearings are in reality the vitals of the motor, and when these are worn beyond the point of easy adjustment or renewal, the repai...